Hp Mu06 Notebook Battery Pinout Configuration Link !!install!! Jun 2026

The HP MU06 is a standard notebook battery often found in HP Pavilion and Envy series laptops. While HP does not officially publish pinout diagrams, technician data and community forums like Laptop Battery Analyzer Forum provide standard configurations for this 9-pin connector. HP MU06 Standard Pinout Configuration

Without resetting the BMS, the laptop will still show "0%" or "Replace Battery" even with new cells. hp mu06 notebook battery pinout configuration link

| Pin | Signal Name | Function | Typical Wire Color | |-----|---------------|---------------------------------------------------|--------------------| | 1 | B+ (Battery+) | Main positive terminal (8.4V – 12.6V, nominal 11.4V) | Red or Black | | 2 | B+ (Battery+) | Same as Pin 1 (current sharing) | Red or Black | | 3 | SCL | SMBus Clock Line (3.3V logic, 100 kHz) | White or Gray | | 4 | SDA | SMBus Data Line (3.3V logic) | Yellow or Blue | | 5 | SMBD_ALERT# | Battery alert (interrupt to EC) - open drain | Green or Orange | | 6 | PRES (or ID) | Battery presence detection (pulled low inside battery) | Brown | | 7 | THERM | Thermistor output (10k NTC to ground, ~1.5V at 25°C) | Violet | | 8 | B- (Ground) | Main negative terminal (0V) | Black (thick) | | 9 | B- (Ground) | Same as Pin 8 (current return) | Black (thick) | The HP MU06 is a standard notebook battery

Note: Some models combine or omit pins for cost or size reduction. | Pin | Signal Name | Function |

Pins 10 and 11 are often not connected (NC) or used as additional presence detection. If your battery has 11 pins, ignore the extra pins – the first 9 pins match the above table.