The first goal is to place PCs into the correct VLANs. VLANs must be created in the switch’s database before assignment.
Some curriculum versions of Lab 162 replace the Multilayer Switch with an actual router (e.g., 1941) connected to a single Layer 2 switch via a trunk. This is known as .
Once the configuration is applied, you must verify that the interfaces are up and the addresses are correct. In the Cisco world, show commands are your best friends.
Then she checked the router’s config again. There it was, hidden under a vty line she never configured: transport input all .
Before testing, verify the routing table on the Multilayer Switch:
Router# show version
Adamawa ACJL 2018
Bauchi ACJL 2017
Bayelsa ACJL 2019
Delta ACJL 2016
Ebonyi ACJL 2019
Imo ACJL
Lagos ACJL 2021
Nasawara ACJL 2018
Ogun ACJL 2018
Ondo ACJL 2020
Osun ACJL 2018
Oyo ACJL 2016
Plateau State ACJ Bill 2018 cisco+lab+162
Sokoto ACJL 2018
Yobe ACJL 2019
The first goal is to place PCs into the correct VLANs. VLANs must be created in the switch’s database before assignment.
Some curriculum versions of Lab 162 replace the Multilayer Switch with an actual router (e.g., 1941) connected to a single Layer 2 switch via a trunk. This is known as .
Once the configuration is applied, you must verify that the interfaces are up and the addresses are correct. In the Cisco world, show commands are your best friends.
Then she checked the router’s config again. There it was, hidden under a vty line she never configured: transport input all .
Before testing, verify the routing table on the Multilayer Switch:
Router# show version