Epson SX115 Adjustment Program – Address 39 Verified Reset Description: This verified procedure resets the waste ink counter on an Epson Stylus SX115 via the service adjustment program. Use address offset 39 (hex) in the EEPROM editor section of the tool. After reading the counter value, initialize the counter at address 39, then verify that the value returns to 0x0000. This method has been tested on firmware versions up to 2.13. Ensure the printer is in service mode before starting.
If your SX115 is pulling paper in crookedly or leaving roller marks, the Adjustment Program allows for "PF (Paper Feed) Adjustment." This recalibrates the motor speed and roller tension settings stored in the EEPROM. adjustment program epson sx115 39 verified
Epson adjustment programs are proprietary service tools. They are not officially distributed to end-users, and using an incorrect or unverified program can permanently brick your printer (e.g., reset a waste ink counter beyond limits). Proceed at your own risk. Epson SX115 Adjustment Program – Address 39 Verified
The (often referred to as a "Resetter") for the Epson Stylus SX115 This method has been tested on firmware versions up to 2
However, the "Verified" status should serve as a warning as much as an assurance. It verifies that the software is safe for your computer and functional for your printer logic board, but it cannot verify the state of your internal hardware. The responsible use of this tool requires a dual approach: resetting the digital counter while acknowledging and mitigating the physical reality of waste ink accumulation.