Bonavita Hudson Ii Lifestyle Crib Instructions -
Open the box and lay out all parts against the manual. Pay special attention to the Mattress Support Board . It is heavy and has specific high/low orientations.
The Bonavita Hudson II is a 30-minute assembly that feels like a 3-hour project if you rush. Take your time. Use a rubber mallet to gently seat the dowels (do not use a metal hammer). Once built, this is a heirloom-quality piece that will last from birth to college graduation. bonavita hudson ii lifestyle crib instructions
Use the highest position for newborns and lower it as your child begins to sit or stand. Open the box and lay out all parts against the manual
| Mode | Parts Needed (Sold separately) | Key Instruction | | :--- | :--- | :--- | | | All original sides | Mattress at highest setting. | | Toddler Bed (2-4 yrs) | Conversion Kit (1 guard rail) | Remove one long side panel. Install the low guard rail. You must cut the box spring/mattress to a lower height. | | Daybed (4-6 yrs) | No kit needed | Remove the front panel entirely. Keep both long sides. Used for reading/napping. | | Full-Size Bed (6+ yrs) | Full Bed Conversion Kit (Headboard brackets) | Remove all side rails. Attach standard full-size bed frame (not included) to the headboard and footboard using the brackets. | The Bonavita Hudson II is a 30-minute assembly
What is the on the sticker (usually found on the bottom rail)?
which includes two wooden bed rails and slats to replace the crib sides. Important Safety Information Mattress Size: Ensure the mattress is at least and no thicker than 6 inches to prevent entrapment. Slat Spacing: The gap between slats should not exceed Placement: