: Ensure your printer is connected via USB ; the software does not work over Wi-Fi.
Are you seeing a specific (like 0x10) or just the ink pad message ?
Connect your printer to your PC via USB cable. Ensure no other USB printing devices are active. Epson L805 L810 L850 Resetter And Adjustment Program
Click "Particular Adjustment Mode" and select "Waste ink pad counter" from the list. Verify & Initialize:
| Function | Description | |----------|-------------| | | Resets protection counter to 0% – essential after physical pad cleaning/replacement. | | Initial ink fill | Forces printer to pull ink from tanks to head (useful after deep clogs or head swap). | | Printhead alignment | Manual bi-directional & uni-directional adjustment. | | Head ID registration | Writes new head’s unique ID into EEPROM – prevents wrong density issues. | | Borderless print counter | Reset if you only use borderless printing (fills pads faster). | | EEPROM dump | Save/load printer EEPROM data (advanced troubleshooting). | : Ensure your printer is connected via USB
For the Epson L805, L810, and L850, the Adjustment Program is a powerful utility that extends the life of the hardware well beyond the manufacturer's intended service cycle. While the "Resetter" offers a quick fix for the error message, the true value lies in the full Adjustment Program, which allows for precise calibration and maintenance. However, this power comes with responsibility: the user must ensure the physical waste ink management is handled correctly to prevent turning a software error into a hardware failure.
The Resetter allows you to:
: Configures the printer’s base parameters, often used after a mainboard replacement. EEPROM Operations