Leica Tc 407 — Driver High Quality

The is not a mythical piece of lost software—it is simply the combination of a robust USB-serial bridge driver (FTDI or Prolific) and the correct Windows communication settings. While the total station itself is aging, its data transfer capabilities remain fully functional with modern PCs if you follow the steps outlined above.

The Leica TC407 is a total station (surveying instrument) from Leica Geosystems' TC400 series. This report summarizes driver/software needs, typical installation steps, troubleshooting, compatibility, and recommendations for connecting the TC407 to a computer or data-collector. LEICA TC 407 driver

If you simply want to get points off the TC 407 and onto a laptop, you do not need a proprietary Leica driver. You need a terminal emulator. The is not a mythical piece of lost

: Ensure the instrument is turned on and the cable is firmly seated in the port underneath the screen. "Port Busy" Error : Ensure the instrument is turned on and

Unlike modern total stations that support Bluetooth or Wi-Fi, the Leica TC 407 communicates via a . To transfer data (coordinates, survey points, or firmware updates), you need a specific piece of software bridge: the LEICA TC 407 driver .

: For modern Windows (10/11), ensure you run the installation as an Administrator to prevent COM port detection issues.