The Robopac 2001 shuddered. The motor engaged with a high-pitched whine. The turntable began to spin. The carriage rose, dispensing the film with perfect, mathematical tension. It wrapped the bottom, paused for the reinforced double-wrap, and rose to the top.
| Issue | Likely Cause | Solution | | :--- | :--- | :--- | | | Safety sensor activated or battery low. | Check that the mast is vertical. Check battery level. | | Carriage does not move up/down | Limit switch triggered or button fault. | Check if the carriage is at the very top or bottom limit. Manually lower/raise slightly. | | Film breaks frequently | Tension too high. | Adjust the tension knob on the carriage (usually marked 1-10) to a lower number. | | Load tips over | Speed too high. | Reduce rotation speed using the knob on the panel. | robopac robot 2001 manuale work
The original manual covers three main operational phases: setup, automatic cycle, and emergency interventions. The Robopac 2001 shuddered
Standard capacity up to 2,500 mm, detected via an onboard photocell. Core Operational Features The carriage rose, dispensing the film with perfect,